2026-04-15T22:11:50Zhttps://repository.ucc.edu.co/server/oai/request

oai:repository.ucc.edu.co:20.500.12494/156122024-08-11T02:48:45Zcom_20.500.12494_11col_20.500.12494_247

Delgado, Daniel Ricardo Polo Vanegas, Angie Julieth 2019-12-13T14:21:41Z 2019-12-13T14:21:41Z 2019-11-22 https://hdl.handle.net/20.500.12494/15612 Polo Vanegas, A. J. (2019). Evaluación del uso de la biomasa del departamento del Huila en la producción de biocombustible densificado (pellet) de alto poder calorífico. (Tesis de pregrado). Recuperado de: http://hdl.handle.net/20.500.12494/15612 Los residuos agrícolas y forestales son las principales fuentes de energía para las actividades domésticas e industriales. Sin embargo, a menudo no se utilizan y son desechados generando impactos negativos. Una alternativa propuesta por un gran número de investigadores es el desarrollo de biocombustibles sólidos a partir de los cuales se obtiene una buena eficacia energética. Es así como en este trabajo se pretende determinar la relación entre las propiedades de resistencia mecánica, humedad, friabilidad, capacidad de humectación, composición y los valores de poder calorífico de diferentes sistemas densificados para determinar si es pertinente el uso de biomasa como alternativa de biocombustible en el departamento del Huila. Introducción -- 1. Resumen -- 2. Planteamiento del problema -- 3. Justificación -- 4. Objetivos -- 4.1 Objetivo General -- 4.2 Objetivos Específicos -- 5. Marco referencial -- 6. Metodología -- 7. Resultados y discusión -- 8. Conclusiones -- Bibliografía angie.polov@campusucc.edu.co 24 p. Universidad Cooperativa de Colombia, Facultad de Ingenierías, Ingeniería Industrial, Neiva Ingeniería Industrial Neiva Biomasa Pirolisis Pellets Briquetas Poder Calorífico Densificación TG 2019 IIN 15612 Evaluación del uso de la biomasa del departamento del Huila en la producción de biocombustible densificado (pellet) de alto poder calorífico Trabajo de grado - Pregrado http://purl.org/coar/resource_type/c_7a1f http://purl.org/coar/version/c_ab4af688f83e57aa info:eu-repo/semantics/bachelorThesis info:eu-repo/semantics/acceptedVersion Atribución – No comercial – Sin Derivar info:eu-repo/semantics/openAccess http://purl.org/coar/access_right/c_abf2 Al Arni, S. (2018). Comparison of slow and fast pyrolysis for converting biomass into fuel. Renewable Energy, 124, 197–201. https://doi.org/10.1016/j.renene.2017.04.060 Alauddin, Z. A. B. Z., Lahijani, P., Mohammadi, M., & Mohamed, A. R. (2010). Gasification of lignocellulosic biomass in fluidized beds for renewable energy development: A review. Renewable and Sustainable Energy Reviews. Elsevier Ltd. https://doi.org/10.1016/j.rser.2010.07.026 liari, Y., & Haghani, A. (2016, June 1). Planning for integration of wind power capacity in power generation using stochastic optimization. Renewable and Sustainable Energy Reviews. Elsevier Ltd. https://doi.org/10.1016/j.rser.2016.01.018 Armaroli, N., & Balzani, V. (2011, September). Towards an electricity-powered world. Energy and Environmental Science. https://doi.org/10.1039/c1ee01249e Brethauer, S., & Studer, M. H. (2015). Biochemical conversion processes of lignocellulosic biomass to fuels and chemicals - A review. Chimia, 69(10), 572–581. https://doi.org/10.2533/chimia.2015.572 D’Adamo, I., & Rosa, P. (2016). Current state of renewable energies performances in the European Union: A new reference framework. Energy Conversion and Management, 121, 84–92. https://doi.org/10.1016/j.enconman.2016.05.027 Davies, A., Soheilian, R., Zhuo, C., & Levendis, Y. A. (2013). Pyrolytic Conversion of Biomass Residues to Gaseous Fuels for Electricity Generation. Journal of Energy Resources Technology, 136(2), 021101. https://doi.org/10.1115/1.4025286 Difs, K., Wetterlund, E., Trygg, L., & Söderström, M. (2010). Biomass gasification opportunities in a district heating system. Biomass and Bioenergy, 34(5), 637–651. https://doi.org/10.1016/j.biombioe.2010.01.007 Duić, N., Guzović, Z., Kafarov, V., Klemeš, J. J., Mathiessen, B. vad, & Yan, J. (2013). Sustainable development of energy, water and environment systems. Applied Energy, 101, 3–5. https://doi.org/10.1016/j.apenergy.2012.08.002 Fortov, V. E., & Popel’, O. S. (2014). The current status of the development of renewable energy sources worldwide and in Russia. Thermal Engineering, 61(6), 389–398. https://doi.org/10.1134/S0040601514060020 Huber, G. W., Iborra, S., & Corma, A. (2006, September). Synthesis of transportation fuels from biomass: Chemistry, catalysts, and engineering. Chemical Reviews. https://doi.org/10.1021/cr068360d Keshav, P. K., Shaik, N., Koti, S., & Linga, V. R. (2016). Bioconversion of alkali delignified cotton stalk using two-stage dilute acid hydrolysis and fermentation of detoxified hydrolysate into ethanol. Industrial Crops and Products, 91, 323–331. https://doi.org/10.1016/j.indcrop.2016.07.031 Liu, Z., & Han, G. (2015). Production of solid fuel biochar from waste biomass by low temperature pyrolysis. Fuel, 158, 159–165. https://doi.org/10.1016/j.fuel.2015.05.032 Mišljenović, N., Mosbye, J., Schüller, R. B., Lekang, O. I., & Salas-Bringas, C. (2015). Physical quality and surface hydration properties of wood based pellets blended with waste vegetable oil. Fuel Processing Technology, 134, 214–222. https://doi.org/10.1016/j.fuproc.2015.01.037 Mohan, D., Pittman, C. U., & Steele, P. H. (2006, May). Pyrolysis of wood/biomass for bio-oil: A critical review. Energy and Fuels. https://doi.org/10.1021/ef0502397 Muazu, R. I., & Stegemann, J. A. (2015). Effects of operating variables on durability of fuel briquettes from rice husks and corn cobs. Fuel Processing Technology, 133, 137–145. https://doi.org/10.1016/j.fuproc.2015.01.022 Nizetic, S. (2011). Technical utilisation of convective vortices for carbon-free electricity production: A review. Energy, 36(2), 1236–1242. https://doi.org/10.1016/j.energy.2010.11.021 Nižetić, S., Tolj, I., & Papadopoulos, A. M. (2015). Hybrid energy fuel cell based system for household applications in a Mediterranean climate. Energy Conversion and Management, 105, 1037–1045. https://doi.org/10.1016/j.enconman.2015.08.063 Promdee, K., & Vitidsant, T. (2013). Synthesis of char, bio-oil and gases using a screw feeder pyrolysis reactor. Coke and Chemistry, 56(12), 466–469. https://doi.org/10.3103/S1068364X13120107 Ragauskas, A. J., Williams, C. K., Davison, B. H., Britovsek, G., Cairney, J., Eckert, C. A., … Tschaplinski, T. (2006, January 27). The path forward for biofuels and biomaterials. Science. https://doi.org/10.1126/science.1114736 Schneider, J., Grube, C., Herrmann, A., & Rönsch, S. (2016). Atmospheric entrained-flow gasification of biomass and lignite for decentralized applications. Fuel Processing Technology, 152, 72–82. https://doi.org/10.1016/j.fuproc.2016.05.047 Schönnenbeck, C., Trouvé, G., Valente, M., Garra, P., & Brilhac, J. F. (2016). Combustion tests of grape marc in a multi-fuel domestic boiler. Fuel, 180, 324–331. https://doi.org/10.1016/j.fuel.2016.04.034 Serrano, C., Monedero, E., Lapuerta, M., & Portero, H. (2011). Effect of moisture content, particle size and pine addition on quality parameters of barley straw pellets. Fuel Processing Technology, 92(3), 699–706. https://doi.org/10.1016/j.fuproc.2010.11.031 Soto, G., & Núñez, M. (2008). Manufacturing pellets of charcoal, using saw dust of Pinus radiata (D. Don), as a binder material. Maderas: Ciencia y Tecnologia, 10(2), 129–137. https://doi.org/10.4067/S0718-221X2008000200005 Sutcu, H. (2008). The examination of liquid, solid, and gas products obtained by the pyrolysis of the three different peat and reed samples. Journal of Energy Resources Technology, Transactions of the ASME, 130(2), 0214011–0214014. https://doi.org/10.1115/1.2906118 Tabakaev, R., Shanenkov, I., Kazakov, A., & Zavorin, A. (2017). Thermal processing of biomass into high-calorific solid composite fuel. Journal of Analytical and Applied Pyrolysis, 124, 94–102. https://doi.org/10.1016/j.jaap.2017.02.016 Tugov, A. N., Ryabov, G. A., Shtegman, A. V., Ryzhii, I. A., & Litun, D. S. (2016). All-Russia Thermal Engineering Institute experience in using difficult to burn fuels in the power industry. Thermal Engineering, 63(7), 455–462. https://doi.org/10.1134/S0040601516070089 Tumuluru, J. S., Wright, C. T., Hess, J. R., & Kenney, K. L. (2011, November). A review of biomass densification systems to develop uniform feedstock commodities for bioenergy application. Biofuels, Bioproducts and Biorefining. https://doi.org/10.1002/bbb.324 Vassilev, S. V., Vassileva, C. G., & Vassilev, V. S. (2015, June 8). Advantages and disadvantages of composition and properties of biomass in comparison with coal: An overview. Fuel. Elsevier Ltd. https://doi.org/10.1016/j.fuel.2015.05.050 Venkata Mohan, S., Nikhil, G. N., Chiranjeevi, P., Nagendranatha Reddy, C., Rohit, M. V., Kumar, A. N., & Sarkar, O. (2016, September 1). Waste biorefinery models towards sustainable circular bioeconomy: Critical review and future perspectives. Bioresource Technology. Elsevier Ltd. https://doi.org/10.1016/j.biortech.2016.03.130 Xiu, S., & Shahbazi, A. (2012, September). Bio-oil production and upgrading research: A review. Renewable and Sustainable Energy Reviews. https://doi.org/10.1016/j.rser.2012.04.028 Al Arni, S. (2018). Comparison of slow and fast pyrolysis for converting biomass into fuel. Renewable Energy, 124, 197–201. https://doi.org/10.1016/j.renene.2017.04.060 Alauddin, Z. A. B. Z., Lahijani, P., Mohammadi, M., & Mohamed, A. R. (2010). Gasification of lignocellulosic biomass in fluidized beds for renewable energy development: A review. Renewable and Sustainable Energy Reviews. Elsevier Ltd. https://doi.org/10.1016/j.rser.2010.07.026 Aliari, Y., & Haghani, A. (2016, June 1). Planning for integration of wind power capacity in power generation using stochastic optimization. Renewable and Sustainable Energy Reviews. Elsevier Ltd. https://doi.org/10.1016/j.rser.2016.01.018 Armaroli, N., & Balzani, V. (2011, September). Towards an electricity-powered world. Energy and Environmental Science. https://doi.org/10.1039/c1ee01249e Brethauer, S., & Studer, M. H. (2015). Biochemical conversion processes of lignocellulosic biomass to fuels and chemicals - A review. Chimia, 69(10), 572–581. https://doi.org/10.2533/chimia.2015.572 D’Adamo, I., & Rosa, P. (2016). Current state of renewable energies performances in the European Union: A new reference framework. Energy Conversion and Management, 121, 84–92. https://doi.org/10.1016/j.enconman.2016.05.027 Davies, A., Soheilian, R., Zhuo, C., & Levendis, Y. A. (2013). Pyrolytic Conversion of Biomass Residues to Gaseous Fuels for Electricity Generation. Journal of Energy Resources Technology, 136(2), 021101. https://doi.org/10.1115/1.4025286 Difs, K., Wetterlund, E., Trygg, L., & Söderström, M. (2010). Biomass gasification opportunities in a district heating system. Biomass and Bioenergy, 34(5), 637–651. https://doi.org/10.1016/j.biombioe.2010.01.007 Duić, N., Guzović, Z., Kafarov, V., Klemeš, J. J., Mathiessen, B. vad, & Yan, J. (2013). Sustainable development of energy, water and environment systems. Applied Energy, 101, 3–5. https://doi.org/10.1016/j.apenergy.2012.08.002 Fortov, V. E., & Popel’, O. S. (2014). The current status of the development of renewable energy sources worldwide and in Russia. Thermal Engineering, 61(6), 389–398. https://doi.org/10.1134/S0040601514060020 Huber, G. W., Iborra, S., & Corma, A. (2006, September). Synthesis of transportation fuels from biomass: Chemistry, catalysts, and engineering. Chemical Reviews. https://doi.org/10.1021/cr068360d Keshav, P. K., Shaik, N., Koti, S., & Linga, V. R. (2016). Bioconversion of alkali delignified cotton stalk using two-stage dilute acid hydrolysis and fermentation of detoxified hydrolysate into ethanol. Industrial Crops and Products, 91, 323–331. https://doi.org/10.1016/j.indcrop.2016.07.031 Liu, Z., & Han, G. (2015). Production of solid fuel biochar from waste biomass by low temperature pyrolysis. Fuel, 158, 159–165. https://doi.org/10.1016/j.fuel.2015.05.032 Mišljenović, N., Mosbye, J., Schüller, R. B., Lekang, O. I., & Salas-Bringas, C. (2015). Physical quality and surface hydration properties of wood based pellets blended with waste vegetable oil. Fuel Processing Technology, 134, 214–222. https://doi.org/10.1016/j.fuproc.2015.01.037 Mohan, D., Pittman, C. U., & Steele, P. H. (2006, May). Pyrolysis of wood/biomass for bio-oil: A critical review. Energy and Fuels. https://doi.org/10.1021/ef0502397 Muazu, R. I., & Stegemann, J. A. (2015). Effects of operating variables on durability of fuel briquettes from rice husks and corn cobs. Fuel Processing Technology, 133, 137–145. https://doi.org/10.1016/j.fuproc.2015.01.022 Nizetic, S. (2011). Technical utilisation of convective vortices for carbon-free electricity production: A review. Energy, 36(2), 1236–1242. https://doi.org/10.1016/j.energy.2010.11.021 Nižetić, S., Tolj, I., & Papadopoulos, A. M. (2015). Hybrid energy fuel cell based system for household applications in a Mediterranean climate. Energy Conversion and Management, 105, 1037–1045. https://doi.org/10.1016/j.enconman.2015.08.063 Promdee, K., & Vitidsant, T. (2013). Synthesis of char, bio-oil and gases using a screw feeder pyrolysis reactor. Coke and Chemistry, 56(12), 466–469. https://doi.org/10.3103/S1068364X13120107 Ragauskas, A. J., Williams, C. K., Davison, B. H., Britovsek, G., Cairney, J., Eckert, C. A., … Tschaplinski, T. (2006, January 27). The path forward for biofuels and biomaterials. Science. https://doi.org/10.1126/science.1114736 Schneider, J., Grube, C., Herrmann, A., & Rönsch, S. (2016). Atmospheric entrained-flow gasification of biomass and lignite for decentralized applications. Fuel Processing Technology, 152, 72–82. https://doi.org/10.1016/j.fuproc.2016.05.047 Schönnenbeck, C., Trouvé, G., Valente, M., Garra, P., & Brilhac, J. F. (2016). Combustion tests of grape marc in a multi-fuel domestic boiler. Fuel, 180, 324–331. https://doi.org/10.1016/j.fuel.2016.04.034 Serrano, C., Monedero, E., Lapuerta, M., & Portero, H. (2011). Effect of moisture content, particle size and pine addition on quality parameters of barley straw pellets. Fuel Processing Technology, 92(3), 699–706. https://doi.org/10.1016/j.fuproc.2010.11.031 Soto, G., & Núñez, M. (2008). Manufacturing pellets of charcoal, using saw dust of Pinus radiata (D. Don), as a binder material. Maderas: Ciencia y Tecnologia, 10(2), 129–137. https://doi.org/10.4067/S0718-221X2008000200005 Sutcu, H. (2008). The examination of liquid, solid, and gas products obtained by the pyrolysis of the three different peat and reed samples. Journal of Energy Resources Technology, Transactions of the ASME, 130(2), 0214011–0214014. https://doi.org/10.1115/1.2906118 Tabakaev, R., Shanenkov, I., Kazakov, A., & Zavorin, A. (2017). Thermal processing of biomass into high-calorific solid composite fuel. Journal of Analytical and Applied Pyrolysis, 124, 94–102. https://doi.org/10.1016/j.jaap.2017.02.016 Tugov, A. N., Ryabov, G. A., Shtegman, A. V., Ryzhii, I. A., & Litun, D. S. (2016). All-Russia Thermal Engineering Institute experience in using difficult to burn fuels in the power industry. Thermal Engineering, 63(7), 455–462. https://doi.org/10.1134/S0040601516070089 Tumuluru, J. S., Wright, C. T., Hess, J. R., & Kenney, K. L. (2011, November). A review of biomass densification systems to develop uniform feedstock commodities for bioenergy application. Biofuels, Bioproducts and Biorefining. https://doi.org/10.1002/bbb.324 Vassilev, S. V., Vassileva, C. G., & Vassilev, V. S. (2015, June 8). Advantages and disadvantages of composition and properties of biomass in comparison with coal: An overview. Fuel. Elsevier Ltd. https://doi.org/10.1016/j.fuel.2015.05.050 Venkata Mohan, S., Nikhil, G. N., Chiranjeevi, P., Nagendranatha Reddy, C., Rohit, M. V., Kumar, A. N., & Sarkar, O. (2016, September 1). Waste biorefinery models towards sustainable circular bioeconomy: Critical review and future perspectives. Bioresource Technology. Elsevier Ltd. https://doi.org/10.1016/j.biortech.2016.03.130 Xiu, S., & Shahbazi, A. (2012, September). Bio-oil production and upgrading research: A review. Renewable and Sustainable Energy Reviews. https://doi.org/10.1016/j.rser.2012.04.028 Zhang, S., Asadullah, M., Dong, L., Tay, H. L., & Li, C. Z. (2013). An advanced biomass gasification technology with integrated catalytic hot gas cleaning. Part II: Tar reforming using char as a catalyst or as a catalyst support. Fuel, 112, 646–653. https://doi.org/10.1016/j.fuel.2013.03.015 Publicationopen.access