Please use this identifier to cite or link to this item:
Exportar a:
Full metadata record
DC FieldValueLanguage
dc.creatorGallego Cossio, Laura Constanza-
dc.creatorAraque De Los Rios, Oscar Javier-
dc.creatorPérez, Eduardo-
dc.creatorUrrego, Luis Fabian-
dc.description.abstractThis manuscript studies the behavior of an ASTM A 36 structural steel specimen with a circular stress concentrator of variable diameter and a notch using computational modeling of finite elements (Ansys) and fracture mechanics, the test specimen has a thickness of 5 mm and a notch of 30 mm with opening of 45° was subjected to cyclic axial load and the diameter of the concentrator varies from 5mm, 9mm, 13mm,17mm and 21 mm. This in order to establish the function that describes the behavior of the dimensionless geometrical factor (β) in the calculation of the Stress Intensity Factor (SIF). For each selected diameter, the characteristic equation is obtained using the Support Vector Machine algorithm based on the Kernel equations. These results were compared with other accepted modes, obtaining a high degree of correlation and an error percentage close to 1.7%. As a main contribution, a new general mathematical model is obtained for specimens of defined geometry and concentrator of circular
dc.publisherUniversidad Cooperativa de Colombia, Facultad de Ciencias Económicas, Administrativas y Contables, Contaduría Pública, Ibaguées
dc.relation.ispartofInternational Journal of Engineering Research and Technologyes
dc.subjectStress intensity factores
dc.subjectGeometric factores
dc.subjectCrack growthes
dc.subjectStructural steeles
dc.titleDetermination of geometric factor for crack growing from a notches
dc.publisher.programContaduría Públicaes
dc.identifier.bibliographicCitationAraque, O., Pérez, E., Urrego, L. y Gallego, L. (2019). Determination of geometric factor for crack growing from a notch. International Journal of Engineering Research and Technology, 12(9),
dc.source.bibliographicCitationNairn, J.A., “Direct comparison of anisotropic damage mechanics to fracture mechanics of explicit cracks”, Engineering Fracture Mechanics, No. 203, (2018), 197- 207es
dc.source.bibliographicCitationMecholsky Jr, J., “Fracture mechanics principles”, Dental Materials, Vol. 11, No. 2, (1995), 111-112es
dc.source.bibliographicCitationTaylor, D., Cornetti, P., & Pugno, N., “The fracture mechanics of finite crack extension”, Engineering Fracture Mechanics, Vol. 72, No. 7, (2005), 1021-1038es
dc.source.bibliographicCitationAtzori, B., Lazzarin, P., & Meneghetti, G., “Fracture mechanics and notch sensitivity”, Fatigue & Fracture of Engineering Materials & Structures, Vol. 26, No. 3, (2003),
dc.source.bibliographicCitationSmith, S. M., & Scattergood, R. O., “Crack‐shape effects for indentation fracture toughness measurements”, Journal of the American Ceramic Society, Vol. 75, No. 2, (1992), 305-315es
dc.source.bibliographicCitationNewman Jr, J. C., & Raju, I. S., “An empirical stressintensity factor equation for the surface crack”, Engineering fracture mechanics, Vol. 15, No. (1-2), (1981),
dc.source.bibliographicCitationNix, K. J., & Lindley, T. C., “The application of fracture mechanics to fretting fatigue”, Fatigue & Fracture of Engineering Materials & Structures, Vol. 8, No. 2, (1985),
dc.source.bibliographicCitationClarke, S. M., Griebsch, J. H., & Simpson, T. W., “Analysis of support vector regression for approximation of complex engineering analyses”, Journal of mechanical design, Vol. 127, No. 6, (2005),
dc.source.bibliographicCitationSmola, A. J., & Schölkopf, B., “A tutorial on support vector regression”, Statistics and computing, Vol. 14, No. 3, (2004),
dc.source.bibliographicCitationHeydari, M. H., & Choupani, N., “A new comparative method to evaluate the fracture properties of laminated composite”, International Journal of Engineering, Vol. 27, No. 6, (2014),
dc.source.bibliographicCitationEL-Desouky, A. R., & El-Wazery, M. S., “Mixed mode crack propagation of zirconia/nickel functionally graded materials”, International Journal of Engineering (IJE), Vol. 26, No. 8, (2013),
dc.source.bibliographicCitationVapnik, V., "The Nature of Statistical Learning Theory", Springer, New York, (1995).es
dc.source.bibliographicCitationClarke, S. M., Griebsch, J. H., & Simpson, T. W., “Analysis of support vector regression for approximation of complex engineering analyses”, Journal of mechanical design, Vol. 127, No. 6, (2005),
dc.source.bibliographicCitationMatWeb, L. L. C. Material property data. MatWeb,[Online]. Available: http://www. matweb. com. (2019)es
dc.source.bibliographicCitationGhafoori, E., Motavalli, M., Botsis, J., Herwig, A., & Galli, M., “Fatigue strengthening of damaged metallic beams using prestressed unbonded and bonded CFRP plates”, International Journal of Fatigue, No. 44, (2012), 303-315es
dc.source.bibliographicCitationAnderson, T. L., "Fracture mechanics: fundamentals and applications", CRC press, (2017).es
dc.source.bibliographicCitationAraque, O., Arzola, N., & Varón, O., “Computational modeling of fatigue crack propagation in butt welded joints subjected to axial load”, PloS one, Vol. 14, No. 6, (2019),
dc.source.bibliographicCitationHernández Laguna, E., Arzola de la Peña, N., & Araque de los Ríos, O., Fracture mechanics assessment of fatigue semi-elliptical cracks in butt-welded joints. Ingeniare. Revista chilena de ingeniería, Vol. 26, Nº 4, (2018), 568-
dc.source.bibliographicCitationGallego Cossio, L., & Hernandez Aros, L., “Methods of Economic-Financial Valuation: Analysis from a Case of Study”, International Business Management, Vol. 12, Nº 2, (2018),
Appears in Collections:Contaduría Pública

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.